Figuring out turn signal problems can be a confusing task, especially when system shares wires and connections with the warning, parking and braking systems. It takes time to figure out what the problem is. There could be a problem in different parts of the signal like connectors, fuses, wires, flasher units, bulb, etc .When dealing with any vehicle’s electrical circuit; it’s good to have the repair manual of the particular vehicle. It makes it easier to access, troubleshoot, replace component and understand how the wires and other related component are connected. Always follow the instruction and warning in the repair manual for your model to prevent an accident. Below are reasons that may cause the turn signal to stop working. Looking at a couple of reasons that can cause this, fixing the issue becomes much easier.
Either Turn Signals Isn’t Working
This is one of the most common problems in turn signal systems. Inspect the bulb first before troubleshooting it.Ensure that both filaments are still intact. Ensure too that the glass hasn’t turned dark. Lastly, examine the bulb socket for corrosion then ensure that the power connection and the socket ground work.
Turn Signal from Oone Side Not Work Properly
Faulty flasher units or a faulty turn signal switch stand out as the most common culprits here. Start by first checking all the bulbs. Make sure they are properly fixed. Check the sockets too for wear before inspecting all power connections. Then using a light test or a digital millimetre, find out which part of the switch operates the affected side. This will make it easy for you to find the root cause of the problem.
Turn Light does not Turn Ooff
The reasons for this might be either the cam/clock spring is broken or the cancelling finger inside the switch is broken. If this happens, the cam or assembly need to be replaced depending on your specific model. Most times, solving this problem is very easy. Besides, the car owner should follow the manual for the particular car make and model.
Turn Lights Flash Too Fast or Slow
When the turn signal lights flash, it is hard to notice. In case this happened after replacing the flasher or one of the light bulbs, it may be that the wrong type of bulb has been installed or one of the light bulbs must have got burnt. A burned-out bulb causes the indicator light to flash faster. If they are flashing faster than normal rate, it may cause the alternator to overcharge the battery. If they are flashing slower than normal rate, the battery may be undercharged.
Turn Signals Don’t Flash
If the turn signals lights don’t flash, first check a burned-out bulb. If not, test the turn signal flasher and check the signal switch. At the first step, identifying wires are the best way to access signal switch electrical connector. Besides, ensure the system is disabled to avoid airbags inflating.